DSR 22502 IMP Questions For MSBTE Winter 2024 Exam

Welcome to Practicalkida, In this blog post, we share Design of Steel and RCC Structure DSR 22502 IMP Questions For the MSBTE Winter 2024 Exam.

The Design of Steel and RCC Structure Civil Engineering Winter 2024 paper is on 7th December 2024. important questions for this paper are given below.

DSR 22502 IMP Questions For MSBTE Winter 2024 Exam

• Unit 1- Fundamentals of steel structures
• 2 marks questions

1. State advantages and disadvantages of steel as a construction material.
2. Enlist the components and their functions in steel water tanks.
3. Write the functions of steel bridges.
4. Draw any four types of structural steel sections.
5. State types of loads to be considered while designing and steel structure. Also, state respective IS codes.

• 4 marks questions

1. Explain a typical Stress-strain graph for Mild steel.
2. What are the methods of Design and differentiate them?
3. Explain the Terms:
4. Limit state of Strength.
5. Partial safety factors for Loads.
6. Limit state of serviceability
7. Partial safety factors for material strength.
8. State any four rolled steel sections used and sketch anyone.

• Unit 2- Design of steel connections
• 2 marks questions

1. Write any four disadvantages of Bolted connections. Differentiate natural and forced convection.
2. Explain any two types of failure of the bolted joint along with drawings of respective sketches.
3. State the advantages and disadvantages of welded connections over bolted connections. Write any four points of difference.
4. Define Bolt value, pitch, gauge, and edge distance in a bolted joint.
5. Define the effective length of the weld. State how to calculate the length of weld required.

• 4 marks questions

1. Determine the bolt value of a 20mm diameter bolt connecting a 10 mm plate in (i) single shear, (ii) double shear bolts used are 4.6 grade, plate of 410 grade. Take the area of the bolt = 245 mm^2.
2. Design the lap joint between the plates of sizes 100 X 16 mm thick and 100 X 10 mm thick to transmit a factored load of 110 KN using a single row of 16mm bolts of grade 4.6 and grade 410 plate.

Solve the above important questions by using the Design of Steel and RCC Structure I scheme book.

Conclusion

We share all the important questions of DSR above and share them with your classmates.

DSR Manual Answer